4RF Aprisa SR+ - Page 170

170 | Managing the Radio
Aprisa SR+ User Manual 1.11.1
Speed (Mbit/s)
This parameter controls the traffic rate of the Ethernet port. The default setting is Auto.
Option
Function
Auto
Provides auto selection of Ethernet Port Speed
10/100 Mbit/s
10
The Ethernet Port Speed is manually set to 10 Mbit/s
100
The Ethernet Port Speed is manually set to 100 Mbit/s
Duplex
This parameter controls the transmission mode of the Ethernet port. The default setting is Auto.
Option
Function
Auto
Provides auto selection of Ethernet Port duplex setting.
Half Duplex
The Ethernet Port is manually set to Half Duplex.
Full Duplex
The Ethernet Port is manually set to Full Duplex.
Function
This parameter controls the use for the Ethernet port. The default setting is Management and User.
Option
Function
Management Only
The Ethernet port is only used for management of the
network.
Management and User
The Ethernet port is used for management of the network
and User traffic over the radio link.
User Only
The Ethernet port is only used for User traffic over the radio
link.