Aprisa SR+ User Manual 1.11.1
Status
The Status indicates whether a user account is active or locked out.
The user account is currently active.
The user account has been entered but not saved.
Login Protection Mode is active and the user account has been
locked out due to repeated unsuccessful login attempts. The
account will remain locked out for a period defined in ‘Level 1
Lockout Duration’ at the ‘Security > Users’ > Settings tab.
Login Protection Mode is active and the user account has been
locked out due to repeated unsuccessful login attempts. The
account will remain locked out for a period defined in ‘Level 2
Lockout Duration’ at the ‘Security > Users’ > Settings tab.
Login Protection Mode is active and the user account has been
locked out due to repeated unsuccessful login attempts. The user
account is permanently locked out.
This tab shall also provide the interface for the ADMIN user to unlock any locked user accounts.
The ‘Unlock’ button shall be disabled unless a locked account is selected, in which case, clicking the button
will unlock the selected account.
To delete a user:
1. Select Terminal Settings > Security > Users
2. Click on the Select button for the user you wish to delete.
3. Click ‘Delete
4. Click Save.
The user can delete any user account as long as there is at least one ADMIN account left on the radio. If the
user attempts to delete the last ADMIN account on the radio (and click Save), an error popup shall be
displayed.
To change a Password:
1. Select Terminal Settings > Security > Users
2. Click on the Select button for the user you wish to change the Password.
3. Enter the Password.
4. Click Save.
A password can be 8 to 32 characters but cannot contain tabs.
To Next Page
Loading...
