ABB ACQ810 - Alternative Output Busbar Configurations; Control Unit Variants

Operation principle and hardware description 25
 Alternative output busbar configurations
The motor busbars can be fastened on the left-hand long side of the module and DC
busbars on the right-hand side. Alternatively, the motor can be fastened on the right-hand
long side of the module and DC busbars on the left-hand side. The output busbars can
also be fastened on the short back side of the module. For more information, contact your
local ABB representative.
 Control unit variants
Output busbars on the short side of
the module
Control unit without control
panel and panel holder
(+0J400)
a) When covers are
removed
Control unit with control
panel (standard)
a)
Control unit without front
cover (+0C168)