42 Planning the cabinet installation
Planning the placement of the control panel
Note the following alternatives when planning the placement of the control panel:
• The control panel can be snapped on the control unit. See page 23.
• The control panel can be mounted onto the cabinet door using the control panel
mounting kit (+J410). For the installation instructions, refer to ACS-CP-U control panel
IP54 mounting platform kit (+J410) installation guide (3AUA0000049072 [English]).
Planning the use of cubicle heaters
Use a cubicle heater if there is a risk of condensation in the cabinet. Although the primary
function of the heater is to keep the air dry, it may also be required for heating at low
temperatures.
To Next Page
Loading...
