ABB ACS 160 - Group 51: Ext Comm Module

ACS 160 User’s Manual 95
Group 51: Ext Comm Module
Parameters of this group need to be adjusted only when an external fieldbus communication module
is installed. Refer to communication module documentation for more information on these
parameters. For standard Modbus communication, see Group 52.
Parameters 5204
COMM FAULT TIME and 5205 COMM FAULT FUNC can be used to detect
communication loss between the drive and the fieldbus communication module.
Code Description
5101 FIELDBUSPAR 1
Parameter 1 of the fieldbus adapter module. Value reflects the type of adapter connected.
* Reserved
5102 -
5115
FIELDBUSPAR 2 - FIELDBUSPAR 15
Refer to communication module documentation for more information on these parameters.
Table 4 List of module types.
Value Module type
0 No module connected.
1 Profibus (CFB-PDP)
2 Modbus *
3 Interbus-S (CFB-IBS)
4 CS31 bus *
5 CANopen (CFB-CAN)
6 DeviceNet (CFB-DEV)
7 LONWORKS (CFB-LON)
8 Modbus+ *
9 Others *