20 ACS 160 User’s Manual
R Product Conformity
CE Marking
A CE mark is attached to the ACS 160 frequency converters to verity that the unit complies with the
requirements of the European
• Low Voltage Directive 73/23/EEC with amendments
• EMC Directive 89/336/EEC with amendments
Corresponding declarations and a list of main standards are available on request.
Note! See Appendix C for ACS 160 EMC Instructions.
A frequency converter and a Complete Drive Module (CDM) or a Basic Drive Module (BDM), as
defined in IEC 61800-3, is not considered as a safety related device mentioned in the Machinery
Directive and related harmonised standards. The CDM/BDM/frequency converter can be
considered as a part of safety device if the specific function of the CDM/BDM/frequency converter
fulfils the requirements of the particular safety standard. The specific function of the CDM/BDM/
frequency converter and the related safety standard is mentioned in the documentation of the
equipment.
UL, cUL and C-tick marking
For more information about UL, cUL and C-tick markings please contact your local ABB supplier.
S Recycling
A product to be disposed of contains valuable raw material that should be recycled, thus preserving
energy and natural resources. Instructions for disposal are available from your local ABB supplier.
Both the manual and the package, which is made of corrugated cardboard, are recyclable.
To Next Page
Loading...
