Basic operation 25
Faults and warnings
See Fault tracing on page 45 for detailed information on faults and warnings.
Basic settings and assistants
Backups
Task Actions
Hide/view an active fault. Faults are automatically displayed. If you hide a
fault by pressing (Hide), it automatically
reappears after 60 seconds of no key presses.
You can also view the fault through Options >
Fault status.
Open help page on a fault. Press to view the help page.
Reset an active fault. Press (Reset) to reset an active fault.
View tripping faults. Go to Menu > Event log > Primary faults.
Hide/view an active warning. Warnings are automatically displayed. If you hide
a warning by pressing (Hide), it
automatically reappears if the warning is still active
after 60 seconds of no key presses.
Open help page on a warning. Press (How to fix) or to view the help
page.
Reset an active warning. Warnings disappear automatically once the
condition that has triggered it goes away.
View past warnings and faults. Go to Menu > Event log > Other events.
Task Actions
Adjust backlight brightness. Press + or .
Adjust display contrast. Press + or .
Change language. Go to Menu > Settings > Language.
Change time and date, and related
settings.
Go to Menu > Settings > Date & time.
Launch an assistant. Go to Menu > Assistants and select an assistant
to launch.
Task Actions
Create a backup. See Creating a parameter backupon page 34.
Restore a backup. See Restoring a parameter backup on page 34.
Assistant Panel Guide Rev B.book Page 25 Tuesday, April 10, 2012 12:08 PM