52 Panel-to-PC USB connection
Making the control panel-to-PC USB connection
Note: When connected to a PC, the
control panel displays the USB screen
and does not respond to key presses. In
this mode, you can only interact with the
control panel or the drive through the PC
tool.
To connect the control panel to a PC,
1. open the lid of the USB connector,
2. plug in a USB cable,
3. connect to a PC.
The control panel displays the USB
screen.
Assistant Panel Guide Rev B.book Page 52 Tuesday, April 10, 2012 12:08 PM
To Next Page
Loading...
Need help?
General
