32 Functions in the main Menu
Editing texts
Texts that you can edit with the control panel include
parameter display names in the Home view and their units,
drive names, fault and warning names, and other
customizable notes or names.
• Use and to select letters.
• To add another letter, press .
• To delete the previous letter, press .
• To save the text and exit, press (Save).
• To cancel and exit, press (Cancel).
Note! In the current software version, only the English character set (a...z) is
supported.
Resetting counters
Counters are parameters that measure incremental quantities associated with the
use of the drive such as runtime or energy consumption. Counters are updated
automatically and cannot be edited, but it is possible to reset a counter to zero by
pressing down (Reset) for three seconds.
Note: If a trigger value is defined for the counter, the counter’s progress from zero to
the trigger value is shown as a bar graph.
Assistants
In the Assistants menu, you can launch an assistant. An assistant is a sequence of
steps that help you complete a task, such as setting up the control panel to be used
with the drive and the motor, or fixing a fault.
1. Use and to highlight the desired assistant.
2. Press (Select).
3. Follow the instructions on the screen to complete the
task defined by the assistant:
• Use and to select settings.
• To edit a setting, press (Edit or Select).
• Use and to move between the pages of the assistant. The pie symbol
on the upper right corner of the screen indicates the progress.
• To exit the assistant, press (Exit).
Most settings accessed in assistant steps can also be accessed through the main
Menu or the Parameters menu, but in the assistants they are presented in a more
user-friendly fashion.
Assistant Panel Guide Rev B.book Page 32 Tuesday, April 10, 2012 12:08 PM
To Next Page
Loading...
