28 Functions in the main Menu
Navigating in the Menu
• Use or to select a menu item.
• Use or (Exit) to go back to the Home view.
• Use
or (Select) to enter the selected sub-menu.
Parameters
In the Parameters menu, you can view and edit
parameters. There are four sub-menus through which you
can access the parameters. In each sub-menu, the
grouping principle of the parameters is different.
In each sub-menu, you can edit a parameter by
highlighting it and pressing (Edit). Counter parameters and certain number, text
and bit field parameters cannot be edited, but you can view them by pressing
(View).
Favorites
In the Favorites sub-menu, only user-selected parameters
are listed. The order is determined by the parameter
number.
Editing the list of favorites
1. Select Edit.
2. Check parameters you want to be shown on the list by
pressing (Select).
3. Press (Done) to exit and save changes.
By function
This functionality is available in a future release.
Complete list
In the Complete list sub-menu, all parameter groups are
listed in numerical order. If you select a parameter group,
all parameters in that group are listed and you can view
and edit the parameters. Parameter numbers are always
displayed in this sub-menu.
Assistant Panel Guide Rev B.book Page 28 Tuesday, April 10, 2012 12:08 PM
To Next Page
Loading...
