ABB ACS5000 - Preparing Cables for Cable Entries with Cable Glands

06 ELECTRICAL INSTALLATION
3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 106/186
6.7.1.2 Preparing cables for cable entries with cable glands
Prepare cables with an outer cable screen or shield for EMC bonding with
the metal enclosure of the cabinet as illustrated.
Figure 6-13 Preparing power cables for cable glands
(1) Cable gland
(2) Plate
(3) Heat-shrinkable termination
(4) Outer cable sheath
(5) Conductor insulation removed to
expose cable shield
(6) Cable screen extension to be
connected to PE ground busbar
(7) Sheath seal
1
2
3
4
5
6
7