3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 25/186
01 ABOUT THIS MANUAL
1.6.5 Maintenance
The personnel include all persons who
• Are qualified to carry out preventive and corrective maintenance on
drive as described in this manual
• Are thoroughly familiar with the drive
• Have a sound knowledge of the relevant electrical codes and
specifications covering low and medium voltage equipment
• Are able to assess the hazards associated with the energy sources
of the drive and
act correspondingly
• Know the safe shutdown and grounding procedures for the drive
system
1.7 User’s responsibilities
It is the responsibility of those in charge of the drive to ensure that each
person involved in the installation, operation or maintenance of the drive
has received the appropriate training and has thoroughly read and clearly
understood the instructions in this manual and the relevant safety
instructions.
1.8 Intended use of equipment
Those in charge of the drive must ensure that the drive is only used as
specified in the contractual documents, operated under the conditions
stipulated in the technical specifications and on the rating plate of the
drive, and serviced in the intervals specified by ABB.
Use of the drive outside the scope of the specifications is not permitted.
Intended equipment use also implies that only spare parts recommended
and approved by ABB must be used.
Unauthorized modifications and constructional changes of the drive are
not permitted.
1.9 Cyber security disclaimer
This product is designed to be connected to and to communicate
information and data via a network interface. It is the customer's
sole responsibility to provide and continuously ensure a secure
connection between the product and Customer network or any other
network (as the case may be).
To Next Page
Loading...
