3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 97/186
06 ELECTRICAL INSTALLATION
6.5 Internal wiring
For information on each individual connection, see the Converter
hardware diagram in “Appendix D – Wiring diagrams”.
Internal wiring comprises all cabling and wiring across shipping splits,
and includes:
• Signal cable connection
• Auxiliary power supply cable connection
• Optical fiber connections
• Arc Guard sensor cabling
Make the above mentioned connections through the cable duct in the
upper part of the drive cabinet (Fig. 6-6, Fig. 6-7).
Additionally there is one charging cable to be connected. The charging
cable is located at the bottom of the drive cabinet behind the water pipe.
The cables and wires can be identified by their specific designation. All
cables are prepared for connection and are also marked with the
corresponding terminal designation.
To Next Page
Loading...
