01 ABOUT THIS MANUAL
3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 24/186
1.6 Target groups and required qualification
The drive presented in this manual is part of an industrial environment
where voltages are present that contain a potential hazard of electric
shock and / or burn. For this reason, only personnel who have a thorough
knowledge of the drive and the industrial environment and have obtained
the required qualification should handle, install, operate, or maintain
the drive.
The manual addresses personnel who are responsible for unpacking,
transportation, installation, operation and maintenance of the drive. The
personnel must carry out the below listed tasks in a manner that does not
cause physical harm or danger, and ensures the safe and reliable
functioning of the drive.
IMPORTANT! Commissioning of the drive must only be performed by
qualified and certified ABB personnel
1.6.1 Handling
Personnel must be skilled and experienced in unpacking and transporting
heavy equipment.
1.6.2 Mechanical installation
The personnel must be qualified to prepare the installation site according
to the site and equipment requirements and to perform the installation
accordingly.
1.6.3 Electrical installation
Personnel must have a sound knowledge of the relevant electrical codes
and specifications covering low and medium voltage equipment, be
experienced with electrical wiring principles and know the electrical
symbols typically used in wiring diagrams.
1.6.4 Operation
The personnel include all persons who operate the drive from the local
operator panel of the drive. The personnel must know the functions of the
operator panel, be adequately trained for the drive, and know the driven
process. Special knowledge of frequency converter technology is
not required.
Modbus® Registered trademark of the Modbus Organization, Inc.
Profibus® Registered trademark of Profibus International (PI)
Windows® Registered trademark of Microsoft Corporation
Table 1-9 Trademarks
Trademark Description
To Next Page
Loading...
