06 ELECTRICAL INSTALLATION
3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 114/186
6.8.1.1 Preparing cables for cable entries with sealing modules
1. Unscrew the frame and remove the sealing modules.
Note: For information on removing and installing the sealing modules
and using the compression wedge, see “Appendix A –
Additional manuals”.
2. Prepare the cables with an outer cable screen for EMC bonding with
the metal enclosure of the cabinet as illustrated.
Figure 6-19 Preparing control cables for sealing modules
(1) Sealing module
(2) Conductive foil
(3) Cable sheath removed to expose
cable shield
(4) Conductor screen extension to be
connected to PE terminal
1
2
3
4
4
4
To Next Page
Loading...
