3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 21/186
01 ABOUT THIS MANUAL
1.4 Terms and abbreviations
The following table lists terms and abbreviations you should be familiar
with when using this user manual. Some of the terms and abbreviations
used in this user manual are unique to ABB and might differ from the
normal usage.
Table 1-6 I/O interface
Title Document number
[14] S800 I/O Getting started
(1)
3BSE020923
[15] S800 I/O Modules and Termination Units
(1)
3BSE020924
(1)
Also available online in the ABB Library (https://library.abb.com)
Table 1-7 Serial communications interfaces
Title Document number
[16] Ethernet - NETA-21 remote monitoring tool
user manual
(1)
3AUA0000096939
[17] Modbus - NMBA-01 installation and
start-up guide
(1)
3AFY58919772
[18] Profibus - NPBA-12 installation and
start-up guide
(1)
3BFE64341588
(1)
Also available online in the ABB Library (https://library.abb.com)
Table 1-8 Terms and abbreviations
Term/Abbreviation Definition
AMC The application and motor controller (AMC) is a digital
signal processor and the heart of the drive
control system.
Converter Short form for ACS5000 frequency converter
COU The control unit (COU) consists of a control section, a
customer interface section and a terminal section.
The control section incorporates the hardware for
control, monitoring and protection functions of the drive
and the communication interface to the door-mounted
CDP control panel.
The COU compartment also incorporates the grounding
frame for cable screens and the ground cable, the
grounding accessories and the motor terminal section.
CVMI Current voltage measurement interface
Drive Synonym for ACS5000 frequency converter
To Next Page
Loading...
