3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 91/186
6. Electrical installation
6.1 Safety
6.2 Overview
The installation includes the following items:
• “6.4 Grounding” on page 93
• “6.5 Internal wiring” on page 97
• “6.6 Cable entries” on page 101
• “6.7 Power cables, ground cables, equipotential
bonding conductor” on page 105
• “6.8 Auxiliary power cables and control cables” on page 112
▲ DANGER ⚠
Hazardous voltage!
• Improper work could lead to life-threatening injury or death.
• The electrical installation must be carried out by qualified
personnel according to the site and equipment requirements, and
the relevant electrical codes.
• When the electrical installation is completed, the main and auxiliary
power supply to the drive must not be switched on without the
consent of the
ABB commissioning personnel.
• Take appropriate measures to prevent the main and auxiliary power
supply from being switched on during installation.
To Next Page
