ABB ACS5000 - Entering a Reference Value

3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 159/186
09 CDP CONTROL PANEL
If you change the direction while the motor is running, the motor
automatically ramps down to zero speed and reaccelerates in the
opposite direction to the preset speed. The arrow changes at zero speed.
9.3.2 Entering a reference value
Entering a reference value from the CDP control panel is possible in:
• Local control mode (L)
• Remote control mode (R)
1. Press a mode selection key.
2. To enter the reference value input mode, press the REF key.
1 L <- 600.0 rpm
StateINU ReadyOn
MOTOR SP 600.00 rpm
POWER 75.0 kW
ACT PAR FUNC DRIVE
LOC
I0
RESET REF
ENTER
REM
1 L -> 600.0 rpm 0
StateINU ReadyRun
MOTOR SP 600.00 rpm
POWER 75.0 kW
ACT PAR FUNC DRIVE
LOC
I0
RESET REF
ENTER
REM
1 L -> [600.0 rpm] 0
StateINU ReadyRun
MOTOR SP 600.00 rpm
POWER 75.0 kW
ACT PAR FUNC DRIVE
LOC
I0
RESET REF
ENTER
REM