05 MECHANICAL INSTALLATION
3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 90/186
5.15 Connecting raw water pipes
Connect the incoming and outgoing raw water pipes to the flanges of the
water cooling unit.
Installation material such as counter flanges, bolts, nuts and seals
are supplied.
Note: For dimensions of the raw water entry and the flanges, see
“Appendix C – Mechanical drawings”.
5.16 Fixing the drive to the floor
The base frame provides holes for fixing the drive to the floor. Floor
fixings are not supplied. Bolts and nuts of size M16 are recommended.
To Next Page
Loading...
