ABB ACS5000 - Installing Roof Attachments on Page 84 (Option)

05 MECHANICAL INSTALLATION
3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 84/186
5.11 Installing roof attachments
Note: This section applies to marine drives.
To prevent tilting and dampen vibrations, attach the drive to the ceiling or
the back wall of the drive room according to the instructions. For
information on the fitting location, see “Appendix D – Wiring diagrams”.
Figure 5-8 Roof attachment
Item Details ID number
(1) 2 x nuts M12 HZN 452198P1022
(2) 2 x washers 13 / 29 ST / ZN 9ABA450078P0007
(3) 2 x washers 17x30x3 9ABA450078P0008
(4) 2 x hex-head bolts M16x40 NB 312350P0464
(5) 1 x bracket 3BHB035997R0002
(6) 2 x spacers 3BHB032466R0001
(7) 1 x damping pad 3BHB035998R0001
(8) 1 x bracket 3BHB035997R0001
(9) 2 x damping connectors 3BHB033405R0001
(10) 2 x plates 3BHB035999R0001
(11) 2 x washers 13 / 29 ST / ZN 9ABA450078P0007
(12) 2 x hex-head bolts M12x80 NB 312450P8127
12
1
2
3
4
5
6
7
8
9
10
11