3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 85/186
05 MECHANICAL INSTALLATION
1. Assemble the roof attachment.
2. Tighten the bolts firmly.
3. To fix the drive to the ceiling or the back wall, use two suitable struts
per roof attachment (the struts are not part of the scope of delivery).
WARNING! Do not install the struts at a 90° angle to the cabinet
roof (Fig. 5-9).
4. If you fix the drive to the ceiling, use two struts per roof attachment
(1 in Fig. 5-9).
5. If you fix the drive to the back wall, install one strut in a 90° angle to
the drive (2 in Fig. 5-9).
Figure 5-9 Recommended ceiling and wall fixings
(1) Two struts at 45° to ceiling
(2) One strut at 90° to wall
(3) Do not install the struts at a 90°
angle to the cabinet roof
1
2
3
To Next Page
Loading...
