01 ABOUT THIS MANUAL
3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 22/186
DriveDebug DriveDebug is part of ABB’s DriveWare® software tools for
devices using the DDCS communications protocol.
DriveDebug runs on computers with Microsoft Windows®
operating systems. DriveDebug is a specialist tool used to
diagnose, tune and troubleshoot frequency converters.
DriveWindow DriveWindow is a DriveWare® product. DriveWindow is a
32-bit Microsoft Windows® application for
commissioning and maintaining ABB drives equipped
with optical communication links.
DriveMonitor DriveMonitor is a monitoring and diagnostics system that
allows secure access to the frequency converter via the
Internet from a remote location. DriveMonitor provides
long-term monitoring functions that allow to infer
equipment status and improve equipment performance.
EAF Earth fault monitoring
EMC Electromagnetic compatibility
EOI Electrical-optical interface
Equipment Frequency converter and related equipment
EXU The excitation unit (EXU) is part of the drive when a
synchronous motor has to be supplied with excitation
power.
Ground Earth
To ground To connect the electrical equipment to the earth, eg, by a
grounding set or a grounding switch.
I/O device Term of ABB’s S800 I/O process system. An I/O device
consists of a module termination unit (MTU) and one I/O
module.
I/O module Term of ABB’s S800 I/O process system. The I/O module
is an active input or output device for digital or analog
signals.
I/O station Term of ABB’s S800 I/O process system. The I/O station
typically consists of a bus modem and several input and
output devices.
IGCT Integrated gate-commutated thyristor
IPS Insulated power supply
LED Light emitting diode
LSU Line supply unit (rectifier phase module)
MCB The main circuit breaker (MCB) is a major protection
device of the drive system and connects and / or
disconnects the main power supply to the drive.
Table 1-8 Terms and abbreviations (continued)
Term/Abbreviation Definition
To Next Page
Loading...
