3BHS799208 E01 REV E ACS5000 WATER-COOLED USER MANUAL 51/186
03 POWER ELECTRONICS AND CABINET FEATURES
Note: For more information on the parameters for signal allocation, signal
type selection, signal inversion, scaling, and filtering, see “Appendix G –
Signal and parameter table”.
Main circuit breaker
The main circuit breaker (MCB) is an important switching and protection
device of the drive system. Therefore it must only be controlled and
monitored by the drive.
Note: For more information, see:
• "Main circuit breaker engineering guideline" (3BHS125149 E50)
• “2.7 Important note - main circuit breaker”
Peripheral I/O devices
The peripheral input and output devices connected to the AMC circuit
board include:
• “ Local control panel” on page 51
• “ Customer interface” on page 52
• “ S800 I/O system” for parallel signal transfer to external devices
• Fieldbus adapters for serial data transfer to a higher-level
control system
• PC-based service tools comprising:
- Dr iveWare® s oftware tools: includes software tools such as
the commissioning and maintenance tools DriveWindow and
DriveDebug, and DriveOPC for data transfer between ABB drives
and Windows®-based applications.
- Dr iveMoni tor (option ): a monitoring and diagnostics tool that
allows access to the drive from any location in the world via a
secure internet connection.
Local control panel
The control panel serves as the basic user interface for monitoring,
control and operation of the drive and setting of parameters.
Note: For more information on local operation and the CDP control panel,
see “8 Operation” on page 123 and “9 CDP control panel” on page 139.
To Next Page
Loading...
