22 EN
Technical data
* Allowed for 1 minute.
** Recommended values. Do not use ultra rapid or low peak fuses. Follow local rules.
230 V 115 V
Built-in EMC, ACS55-01E- 01A4-2 02A2-2 04A3-2 07A6-2 09A8-2 01A4-1 02A2-1
No EMC, ACS55-01N- 01A4-2 02A2-2 04A3-2 07A6-2 09A8-2 01A4-1 02A2-1
Motor continuous output power kW 0.18 0.37 0.75 1.5 2.2 0.18 0.37
hp 1/4 1/2 1 2 3 1/4 1/2
Frame size (no EMC) A A B C C A A
Frame size (EMC) A A B D D A A
Nominal ratings
Input voltage U
1
V 200-240 (+10/-15%) 110-120 (+10/-15%)
Continuous output current I
2
A 1.42.24.37.69.81.42.2
Max. output current I
2max
* A 2.1 3.3 6.5 11.4 14.7 2.1 3.3
Output voltage U
2
V0-U
1
, 3-phase 0-2xU
1
, 3-phase
Input current I
1
A 4.4 6.9 10.8 18.2 22.0 6.4 9.5
Switching frequency kHz 5 (max. 16)
Protection limits
Overcurrent (peak) A 4.4 6.9 13.5 23.9 30.9 4.4 6.9
Overtemperature 95°C / 203°F (heat sink)
Maximum wire sizes
Power terminals mm2 2.5 (AWG 14) 4 (AWG 12) 2.5 (AWG 14)
Control terminals mm2 1.5 (AWG 16)
Power losses W 21 32 51 74 103 24 35
Line fuse size**
IEC, type IEC269 gG A 10 16 16 25 32 10 16
UL, types CC and T A 10 15 20 25 30 10 15
To Next Page
Loading...
