2-2 Chapter 2: Analyzer module versions SHB_U14
˝
Summary
˝
General
Depending on the measurement task to be carried out, the Uras 14 can be fitted
with the following primary components:
• 1 to 4 infrared detectors
• 1 to 2 beam paths
• Up to 2 infrared detectors per beam path
• Modulator with three possible versions
• 1 emitter in first beam path (second beam path not installed)
• 1 emitter in second beam path (first beam path not installed)
• 2 emitter units
• The following components are permanently installed
•Thermostat-controlled version with heater and controller (option, must be confi.)
•IR module circuit board
•Sensor-CPU circuit board
•Pressure sensor circuit board
• Any additional components depend on the measuring task or desired equipment
level.
• All versions of the module can be installed in a 19" rack or wall-mount housing
without any need for conversion.
• The gas module and oxygen sensor can be combined in an analyzer module gas
path. These components are included in the sensor electronics package.
Special components
According to the measurement task and options ordered, the following components
can be installed:
˝
• 1 to 2 calibration units
• 1 to 2 filter cells
• 1 to 2 optical filters
• Gas paths
• FPM tubing
• PTFE tubing
• Stainless steel tubing
Continued on next page
To Next Page
Loading...
