EasyManua.ls Logo

ABB ControlMaster CM30 - Page 104

ABB ControlMaster CM30
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ControlMaster CM30, CM50 and CMF310
Universal process controllers,
1
/4,
1
/2 DIN and fieldmount 10 Specification
102 IM/CM/ED–EN Rev. X
Outputs
Controls / retransmission outputs
Relays
Digital input / output
2-Wire transmitter power supply
Communications
For MODBUS and Ethernet communications – see
separate User Guide (IM/CM/C–EN).
Infrared port
EMC
Emissions & immunity
Meets requirements of IEC61326 for an
Industrial Environment
Environmental
Operating temperature range
–0 to 55 °C (32 to 131 °F)
Operating humidity range
5 to 95 %RH (non-condensing)
Storage temperature range
–20 to 70 °C (–4 to 158 °F)
Enclosure sealing
CM30 / CM50
CMF310
Vibration (CM30, CM50)
Conforms to EN60068-2-6
Number CM30 / CM50: 2 (1 standard, 1 optional)
CMF310: 4 (2 standard, 2 optional)
Type Configurable as analog or digital pulse
Isolation Galvanically isolated from the rest of the
circuitry, 500 V for 1 minute
Analog
range
0 to 20 mA Programmable
Load 750 Max.
Accuracy 0.25 % of output or
+
/ 10 µA
Number
CM30: 4 (1 standard, 3 optional)
CM50: 4 (2 standard, 2 optional)
CMF310: 6 (4 standard, 2 optional)
Type CM30: Standard with changeover
contacts. Optional contacts selectable
as N/O or N/C (by jumper)
CM50: Selectable as N/O or N/C
(by jumper)
Contact
ratings
CM30 / CM50: 5 A, 240 V
CMF310: 2 A 240 V
Update
rate
125 ms
Number CM30 / 50 / CMF310:
6 (2 standard, 4 optional)
Type User-programmable as input or output
Minimum input pulse duration – 125 ms
Input
–volt-free
( contact open > 10 M /
contact closed < 100 k)
24 V DC
(1-signal 15 to 30 V /
0-signal –3 to 5 V)
TTL
(low: 0 to 0.8 V /
high: 2 to 5 V)
Conforms to IEC 61131-2
Output
Open collector output
30 V, 100 mA max.
Conforms to IEC 61131-2
Update
rate
125 ms
Voltage 24 V DC (CM30/50 only)
Number CM30 / CM50: 2
(1 standard, 1 optional)
CMF310: 1 (optional)
Drive 2 Loops for each transmitter
PSU, 45 mA max.
Baud rate up to 115 kBaud
Distance up to 1 m
Functions firmware upgrade, configuration
upload / download
Front face IP66 / NEMA 4X
Rest of enclosure IP20
Front face and
rest of enclosure
IP66 / NEMA 4X

Table of Contents

Related product manuals