ABB ControlMaster CM30 - Input;Output

ControlMaster CM30, CM50 and CMF310
Universal process controllers,
1
/4,
1
/2 DIN and fieldmount 7 Advanced Level
40 IM/CM/ED–EN Rev. X
…Display
Customise Pages  The contents and appearance of each Operator Page (see page 23)
can be customized to meet particular user requirements.
Page Number Selects the Operator Page (1 to 4) to be customized.
Tem p l a t e Typ e Selects one of the standard operator page templates.
Te m p l a t e c od e s :
A = Analog value, T = Totalizer value, S = State value (see Parameters / Type below).
A (Style 1) A,A (Style 1) A,A,A (Style 1) A,A,A,A (Style 1) A,A,A,A,A A,A,A,A,A,A
A (Style 2) A,A (Style 2) A,A,A (Style 2) A,A,A,A (Style 2) A,A,A,A,S A,A,A,A,A,S
A,A (Style 3) A,A,A (Style 3)* A,A,A,A (Style 3) A,A,S,A,A,A
A,A (Style 4) A,A,A (Style 4) A,A,A,T** A,A,S,A,A,S
A,T (Style 1) A,A,S (Style 1) A,A,T,T
A,A,S (Style 2) Chart
A,A,T
A,T,T
*CM50 only **CM30 only
Titlebar Tag A user-programmable, 16-character alphanumeric tag.
Parameters
Parameter Number 1 to 4 (depending on the Tem plate Typ e selected).
Typ e Enables some parameter types to be modified to enable more flexibility in
the available display formats:
 Parameters set as Tot alizer va lu e by the Te mplat e Typ e can be changed
to analog or state parameters.
 Parameters set as State value by the Tem pla te Type can be changed to
an analog parameter.
Source Selects the signal to be displayed.
Color Selects the color to be used to display this parameter.
Color codes:
Black Red Yellow Green Cyan
Blue Magenta White Grey
Dark Cyan Dark Magenta Dark Grey Dark Yellow Dark Green
Dark Blue Dark Red
Theme RGB* Theme RYG**
*For use with State parameter types:
 State 0 tag is shown in red.
 State 1 tag is shown in green.
 State 2 tag is shown in blue.
Applicable only if Templ at e Typ e = State.
**For use with State parameter types:
 State 0 tag is shown in red.
 State 1 tag is shown in yellow.
 State 2 tag is shown in green.
Applicable only if Templ at e Typ e = State.