ABB ETL600 - Page 310

Revision: Language: Page:
ETL600 System Settings
_ EN A2/A4
HE
No. Action Rack or
module
Item to be
programmed or
fitted
Selected
alternative or
setting
Remarks
A.4.3 Settings for RF hybrid P3LE
Jumpers set according to
configuration file
P3LE
Jumpers LNx,
Nx, Mx, Hx, Sx
[ ]
Standard tuning for P3LE performed P3LE
RA, LP,
C-Jumpers in P
position, R228 in
middle pos.
[ ]
Fine tuning
during
commissioning
A.5 Settings for alarm unit R1BC, if
present
Relay 1 jumper set according to
configuration file
R1BC R1-1, R2-1,CA-1 [ ]
Relay 2 jumper set according to
configuration file
R1BC R1-2, R2-2,CA-2 [ ]
Relay 3 jumper set according to
configuration file
R1BC R1-3, R2-3,CA-3 [ ]
Relay 4 jumper set according to
configuration file
R1BC R1-4, R2-4,CA-4 [ ]
Relay 5 jumper set according to
configuration file
R1BC R1-5, R2-5,CA-5 [ ]
Relay 6 jumper set according to
configuration file
R1BC R1-6, R2-6,CA-6 [ ]
Relay 7 jumper set according to
configuration file
R1BC R1-7, R2-7,CA-7 [ ]
Relay 8 jumper set according to
configuration file
R1BC R1-8, R2-8,CA-8 [ ]
© ABB Switzerland Ltd Form 1KHW001493-EN
Rev. A