Appendix
122 FSM4000 D184B140U02
Change from one to two column s
13 Appendix
13.1 Other applicable documents
• Data sheet (D184S073Uxx)
• Commissioning instructions (D184B141Uxx)
• Interface description for devices with HART communication (D184B126U01/02)
• Interface description for devices with PROFIBUS PA communication (D184B093U29/30)
• Interface description for devices with PROFIBUS Fieldbus communication
(D184B093U31/32)
13.2 Approvals and certifications
CE mark
The version of the meter in your possession meets the requirements of the
following European directives:
- EMC directive 2014/30/EU
- Low voltage directive 2014/35/EU
- RoHS Directive 2011/65/EU
- Pressure equipment directive (PED) 2014/68/EU
Pressure equipment does not receive a CE mark indicating PED compliance
on the factory tag in the event of the following conditions prevailing:
- The maximum permissible pressure (PS) is less than 0.5 bar
- Due to low pressure risks (meter size ≤ DN 25 / 1") no approval procedures
are required.
Important
All documentation, declarations of conformity, and certificates are available in ABB's download
area.
www.abb.com/flow
To Next Page
Loading...
