ABB i-bus EIB

Commissioning
© 2006 ABB STOTZ-KONTAKT GmbH 14
ABB i-bus
®
EIB / KNX
Parameterising the ABZ/S 2.1 with ETS
A comment for the system operator should be entered in the “Description”
field in the ETS3 “Properties” window e.g. project name, function of the
Application Unit Time in the installation and the date.
Fig. 4: ETS3 “General” dialog window
Note: This information is displayed in the table area of the
parameterisation software PZM 2.0 as “Comment of the
installer” after loading the time switch program.