ABB i-bus EIB

Commissioning
© 2006 ABB STOTZ-KONTAKT GmbH 30
ABB i-bus
®
EIB / KNX
3.3.10.4 Save
Fig. 25: “Save” symbol
Saves the parameter data in ETS3.
3.3.10.5 Help
Fig. 26: “Help” symbol
Opens the “Help” file of the application program.
Hotkey: F1
3.3.10.6 Close
Fig. 27: “Close” symbol
Closes the application program. Asks if you wish to save the data, if
necessary.
3.3.10.7 Hotkey selection
• Alt + F4 Close
• F1 Help