ABB i-bus EIB

Device technology
© 2006 ABB STOTZ-KONTAKT GmbH 8
ABB i-bus
®
EIB / KNX
2 Device technology
The Application Unit Time is a DIN rail mounted device for insertion in the
distribution board. The device contains a year time switch program with the
option of defining day routines and week routines individually. Complex
group formations are also possible.
The device is ready for operation after connecting the bus voltage. The
Application Unit Time is parameterised via ETS3. The connection to the bus
is established via the bus connecting terminal at the front of the device.
Fig. 1: ABZ/S 2.1
2.1 Technical data
Power supply - Bus voltage 21 … 32V DC
- Power consumption, bus < 12mA
- Leakage loss, bus Max. 250mW
Connections - EIB / KNX Via bus connecting terminal
Operating and display elements - Programming LED (3) For assignment of the physical address
- Programming button (2) For assignment of the physical address
Type of protection - IP 20 In accordance with DIN EN 60 529
Protection class - II In accordance with DIN EN 61 140
Insulation category Overvoltage category III in accordance with DIN EN 60 664-1
Degree of pollution 2 in accordance with DIN EN 60 664-1
EIB / KNX safety extra-low voltage SELV 24 V DC
Temperature range
- Operation
- Storage
- Transport
- 5°C...+45°C
-25°C...+ 55°C
-25°C...+ 70°C
Ambient conditions - Maximum air humidity 93%, moisture condensation not permitted
Design - DIN rail mounted device (MDRC) Modular installation device, ProM
- Dimensions 90 x 36 x 64.5mm (H x W x D)
- Mounting width in modules 2.2 modules at 18mm
- Mounting depth 64.5mm
Installation - On 35mm mounting rail In accordance with DIN EN 60 715
Mounting position - As required
Weight - 0.1kg
Housing/colour - Plastic housing, grey
Certification - EIB / KNX in accordance with EN 50 090-1, -2 Certificate
CE norm - In accordance with the EMC and low voltage
guidelines
Table 1: Technical data
2CDC071280F0005