ABB i-bus EIB

Commissioning
© 2006 ABB STOTZ-KONTAKT GmbH 199
ABB i-bus
®
EIB / KNX
Send value
Options: on trigger in range A
/
on trigger in range B
The value which should be sent can be defined for each range via the option
on trigger in range A or on trigger in range B.
only on change
A tick in the entry only on change means that a telegram is only sent if the
value has changed e.g. if the light was already switched on and should still
be switched on, this telegram is not sent.
“Insert” button
A new group member is inserted via the Insert button.
“Close” button
The parameter window is closed via the Close button.
“Help” button
The “Help” file can be opened directly via the “Help” button and a further
parameter window Help for application program… is opened.