Commissioning
© 2006 ABB STOTZ-KONTAKT GmbH 25
ABB i-bus
®
EIB / KNX
“Read PC time” button, “Read ABZ/S time” button
The Date and Time fields can be updated with the corresponding time via the
buttons Read PC time and Read ABZ/S time.
“Write ABZ/S time” button
The date and time can also be set via the Write ABZ/S time button.
Note: The time switch program is updated by adjusting the clock.
Switching operations can be triggered as a result.
Adjust clock
Options: -255…0
…+255
The accuracy of the internal clock is dependent in particular on the ambient
temperature and can be up to +/– 1 min per month. By entering a correction
value in the text field Adjust clock, the accuracy of the internal clock is
improved. If the clock gains e.g. 20 seconds a month, this inaccuracy can be
compensated by entering a correction value of “20” which corresponds to
20 seconds.
“Close” button
When the “Close” button is pressed, the function is closed and the parameter
window Set time/date closes.
“Help” button
The “Help” file can be opened directly via the “Help” button and a further
parameter window Help for application program… is opened.
To Next Page
Loading...
