ABB i-bus EIB

Commissioning
© 2006 ABB STOTZ-KONTAKT GmbH 48
ABB i-bus
®
EIB / KNX
Fig. 48: Parameter window: “Day routine, Select new group address”
Group address (Trigger via bus)
Option: new group address
The parameter is divided into Type, Name and No. The table can be
repositioned and sorted as required.
The meaning of the individual columns is as follows:
Type
The type indicates which type of values a telegram with this group address
can send.
Name
The name of the group address is defined during the parameterisation of the
ABB i-bus
®
installation and cannot be modified with the parameterisation
software PZM2.
No.
The number of the group address is the unique identifier of a group address.