ABB i-bus EIB

Commissioning
© 2006 ABB STOTZ-KONTAKT GmbH 85
ABB i-bus
®
EIB / KNX
Options
With the option Send on change only, it is defined that a telegram is only
sent if the value differs from the value that was last sent e.g. if the light
should be switched on and is already switched on, this telegram is not sent.
If the option Send on change only is not selected, the group address and the
object value are sent at the set time.
“OK” button
When the “OK” button is pressed, the settings are adopted and the parameter
window closes.
“Cancel” button
When the “Cancel” button is pressed, the function is aborted and the
parameter window closes.
“Help” button
The “Help” file can be opened directly via the “Help” button and a further
parameter window Help for application program… is opened.