Bottom connector interfaceRear connector interfaceRobot type
xx2000001257
xx2000001256
IRB 1300-
7/1.4 and IRB
1300-12/1.4
Required tools and equipment
NoteEquipment
The content is defined in the section Stand-
ard toolkit on page 759.
Standard toolkit
Other tools and procedures may be required
if the spare part needs to be replaced. These
are specified in the replacement procedure.
Required consumables
NoteArticle numberConsumable
FM 2223HAC029132-001Grease
Lubricating the cable package
Use this procedure to lubricate the cable package.
InformationAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
1
Gain access to the cable package by remov-
ing the covers.
2
Continues on next page
120 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
4 Maintenance
4.5.1 Lubricating the cable package
Continued
To Next Page
Loading...
