5.7.3 Replacing the axis-3 gearbox
Location of the axis-3 gearbox
The axis-3 gearbox is located as shown in the figure.
xx2000001488
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC073080-001Gear unit, axis 3
Not used with protection class
IP40.
Replace if damaged.
3HAC061327-016O-ring on circular spline side, axis
3
3HAC067040-001Timing belt, axis 3
Used with protection classes IP40
and IP67.
Used with protection type
Foundry Plus.
3HAC073306-001Process hub, basic
Used with protection classes IP40
and IP67.
Used with protection type
Foundry Plus.
3HAC073307-001Process hub (CP/CS and air hose,
without Ethernet)
Continues on next page
638 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.7.3 Replacing the axis-3 gearbox
To Next Page
Loading...
