3.2.4 Transportation bracket
Location of the transportation bracket
At delivery, the robot is locked in the correct position with a transportation bracket
for securing the position during shipping and transport. The bracket must be
removed before conducting any service work and must be refitted before shipping
and transportation.
IRB 1300-7/1.4 and IRB 1300-12/1.4IRB 1300-10/1.15IRB 1300-11/0.9
xx1900001528
xx1900001527
xx1900001526
Removing the transportation bracket
NoteAction
CAUTION
For robots with protection type Clean Room
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See Cut the paint or surface on the robot before
replacing parts on page 145.
1
Continues on next page
56 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.2.4 Transportation bracket
To Next Page
Loading...
