ABB IRB 1300 - Replacing the Axis-5 Motor

5.6.5 Replacing the axis-5 motor
Location of the axis-5 motor
The axis-5 motor is located as shown in the figure.
xx2000001485
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 1300 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC073088-001Motor unit, axis 5 and axis 6
3HAC065794-001Timing belt, axis 5
Used with protection classes IP40
and IP67.
Used with protection type
Foundry Plus.
3HAC073306-001Process hub, basic
Used with protection classes IP40
and IP67.
Used with protection type
Foundry Plus.
3HAC073307-001Process hub (CP/CS and air hose,
without Ethernet)
Used with protection classes IP40
and IP67.
Used with protection type
Foundry Plus.
3HAC073308-001Process hub (CP/CS and air hose,
with Ethernet)
Used with protection type Clean
Room.
3HAC077836-001Process hub, basic, Clean Room
Continues on next page
Product manual - IRB 1300 545
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.6.5 Replacing the axis-5 motor