ABB IRB 1300 - Lifting and Rotating a Suspended Mounted Manipulator

3.3.1.2 Lifting and rotating a suspended mounted manipulator
Introduction
How to lift and turn the robot to a suspended position using the turning accessory
is described in the lifting instruction delivered with the lifting accessory. Article
numbers for the accessory and the instruction is specified in Special tools on
page 760. Any additional equipment required is specified in the instruction for the
lifting accessory. Contact ABB for more information.
How to lift and turn the robot into position for wall position: Contact ABB for more
information.
Illustration
xx1900001596
64 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.3.1.2 Lifting and rotating a suspended mounted manipulator