ValueParameter
95% at constant temperatureMaximum ambient humidity
i
At low environmental temperature (below 10° C) a warm-up phase is recommended to be run with
the robot. Otherwise there is a risk that the robot stops or runs with lower performance due to
temperature dependent oil and grease viscosity.
Protection classes, robot
The table shows the available protection types of the robot, with the corresponding
protection class.
Protection class
i
Protection type
IP40Manipulator, protection type Standard
IP67 (option 3350-670)
IP67Manipulator, protection type Foundry Plus 2
ISO 4, IP54Manipulator, protection type Clean Room
i
According to IEC 60529.
Environmental information
The product complies with IEC 63000. Technical documentation for the assessment
of electrical and electronic products with respect to the restriction of hazardous
substances.
40 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
2 Technical data
2.1 Technical data
Continued
To Next Page
Loading...
