Grounding and bonding point on manipulator
There is a grounding/bonding point on the manipulator base. The grounding/bonding
point is used for potential equalizing between control cabinet, manipulator and any
peripheral devices.
xx2000000414
Installation of extra O-rings
For robots with protection class IP67 (option 3350-670)
For robots with protection type Clean Room (option 3351-4)
For robots with protection type Foundry Plus (option 3352-10)
Continues on next page
92 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.6.1 Robot cabling and connection points
Continued
To Next Page
Loading...
