Combined warning label "Do not dismantle" and "Stored energy", 3HAC3981-1F
Instruction label for lifting of robot, 3HAC039840-001G
Warning label "Tip risk when loosening bolts", 3HAC9191-1H
Instruction label "Before dismantling see product manual", 3HAC4591-1J
Label, calibration, 3HAC024307-001K
Warning label "Crush", 3HAC4517-1L
Information labels at gearboxes and at robot base, specifying which oil is used
in gearboxes
N
ABB LogotypeO
Label for marking of axis 7, 3HAC028979-001 (option)P
Required equipment
NoteArt. no.Equipment
Includes all labels specified in previous
figures!
See Spare parts on
page 355.
Labels and plate set
Inspecting, labels
NoteAction
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working area.
1
Check the labels, located as shown in the figures.2
Art. no. is specified in Required
equipment on page 118.
Replace any missing or damaged labels.3
118 3HAC039838-001 Revision: C
© Copyright 2013 ABB. All rights reserved.
3 Maintenance
3.3.6 Inspection, information labels
Continued
To Next Page
Loading...
