NoteAction
xx1000001371
Remove the two VK covers.4
Art. no. is specified in Required
equipment on page 259.
xx1000001375
Fit the lifting accessory, parallel arm on the parallel
arm. Lift the parallel arm to the position shown in
the figure.
5
Art. no. is specified in Required
equipment on page 259.
Disassemble the parallel arm from the lower arm
by using the pressing tool, lower arm.
6
CAUTION
The parallel arm system weighs 125 kg.
All lifting accessories used must be sized accord-
ingly!
7
Continues on next page
3HAC039838-001 Revision: C 261
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.4.9 Replacement of parallel arm
Continued
To Next Page
Loading...
