InfoAction
xx1000001224
Check the gasket. If damaged, replace it.12
xx0600002694
Refit the cable gland with its attachment screw.13
• A: Screw holding the cable
gland
Make sure the gasket is not damaged!
Replace if damaged.
xx1000001106
Refit the cover, motor axis 6 with its attachment
screws and washers.
Note
Make sure the cover is tightly sealed!
14
Continues on next page
3HAC039838-001 Revision: C 299
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.6.3 Replacing motor, axis 6
Continued
To Next Page
Loading...
