NoteAction
18 pcs, M16 x 70, 12.9 quality UN-
BRAKO.
Secure the gearbox with its attachment
screws and washers.
9
Tightening torque: 300 Nm
Reused screws may be used, providing
they are lubricated as detailed in sec-
tion Screw joints on page 347 before fit-
ting.
xx1000001394
xx1000001393
Refit the cable guide in the center of gearbox
1 with its attachment screws.
10
Continues on next page
3HAC039838-001 Revision: C 309
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.7.1 Replacing the axis 1 gearbox
Continued
To Next Page
Loading...
