NoteAction
xx1000001407
Fit the o-ring in the cover.14
M8x35 quality 8.8-A2F (12 pcs)Refit the cover with its attachment screws
and washers.
Note
Fit the cover so that the arrow on the cover
points upwards!
15
Tightening torque: 24 Nm
xx1000001408
See Replacing motors, axes 2 and 3 on
page 284
Refit the motors axes 2-3.16
See Performing a leak-down test on
page 148.
Perform a leakdown test.17
See Filling, axes 2 and 3 on page 134Refill the gearbox axes 2-3 with oil.18
Continues on next page
320 3HAC039838-001 Revision: C
© Copyright 2013 ABB. All rights reserved.
4 Repair
4.7.2 Replacing the gearbox, axes 2- 3
Continued
To Next Page
Loading...
