ABB MicroFlex e190 User Manual

132 Fault tracing
 Communication errors
Code Error Cause What to do
8000 EtherCAT AL status code
(_ecETHERCAT_AL_STAT
USCODE)
This error is listed together with a
Profile Code in the Mint WorkBench
Error Log. Note: The displayed
profile code must be converted to
hexadecimal to give the specific
EtherCAT error code.
This error status indicates that the
EtherCAT master has been sent an
error code by the drive. Check the error
log to determine what the "real" drive
error code is.
8001 CIP configuration error
(_ecCIP_CFG_ERROR)
This error is listed together with a
Profile Code in the Mint WorkBench
Error Log. The displayed profile code
must be converted to hexadecimal to
give the specific CIP general status
code.
This error status indicates that the
EtherCAT master has been sent a CIP
error code by the drive. Check the error
log to determine what the "real" drive
error code is.
8002 POWERLINK error code
(_ecPOWERLINK_ERROR)
This error is listed together with a
Profile Code in the Mint WorkBench
Error Log. The displayed profile code
must be converted to hexadecimal to
give the specific POWERLINK error
code.
This error status indicates that the
POWERLINK master has been sent an
error code by the drive. Check the error
log to determine what the "real" drive
error code is.
8003 PROFInet error code
(ecPROFINET_CFG_ERRO
R)
This error is reported when multicast
MAC filter configuration fails.
This error status indicates that the
PROFInet master has tried to configure
the device ID but has failed.

ABB MicroFlex e190 Specifications

General

Brand	ABB
Model	MicroFlex e190
Category	Servo Drives
Language	English