160 Technical data
Applicable standards
MicroFlex e190 complies with the following standards.
Design and test standards
See also the CE Declaration of Conformity available on the internet; see Document
library on the Internet on page 209.
Environmental test standards:
UL 61800-5-1 Power Conversion Equipment.
EN 61800-5-1:2007 Adjustable speed electrical power drive systems. Safety requirements.
Electrical, thermal and energy.
EN 60529:1991 +
A2:2013
Degrees of protection provided by enclosures.
EN 61800-3:2004 +
A1:2012
Adjustable speed electrical power drive systems. Electromagnetic
compatibility.
Conducted emissions:
When installed as directed in this manual, MicroFlex e190 conforms to
Category C2 conducted limits.
Radiated emissions:
When installed as directed in this manual, MicroFlex e190 conforms to
Category C2 radiated limits.
All frame sizes conform to the ‘second environment’ immunity
requirements defined by this standard.
EN 60068-1:2014 Environmental testing, general and guidance.
EN 60068-2-1:2007 Environmental testing, Test A. Cold.
EN 60068-2-2:2007 Environmental testing, Test B. Dry heat.
EN 60068-2-6:2008 Environmental testing, Test Fc. Vibration (sinusoidal).
EN 60068-2-27:2009 Environmental testing, Test Ea. Shock.
EN 60068-2-30:2005 Environmental testing, Test Db. Damp heat, cyclic.
EN 60068-2-31:2008 Environmental testing, Test Ec. Rough handling shocks
EN 60068-2-78:2013 Environmental testing, Test Cab. Damp heat, steady state.
To Next Page
Loading...
